Weprofab PPE Pipe Features
- Excellent electrical insulation
- Resistant to high temperatures and humid environments
- Stretch and bend resistance
- Resistant to corrosion and organic solvents
- High strength and low density
Your Leading PES Pipe Manufacturer
Weprofab’s PPE pipe has good stability in high temperature and high humidity environments, and is not easy to age and hydrolyze. At the same time, it also has strong corrosion resistance. Strong acids, strong alkalis, and organic solvents cannot corrode it. In addition, our PPE pipe has the characteristics of high strength and light weight, which makes it very easy to transport.
Weprofab’s PPE pipe has a variety of sizes, with diameters ranging from 10mm to 500 mm, wall thicknesses ranging from 0.5mm to 30 mm, and the length can be cut according to your needs
Various Types of PI Pipe
Multi-layer PPE PipeMultilayer water pipe with aluminum and PPE plastic, in compliance with ISO9001 and CE standards
PPE Pipe for Water SupplyPPE pipe for water supply complies with ISO4427 and ASTM F714 standards.
Radiant Heating PPE-RT PipePPE-RT pipes for radiant heating and cooling piping systems.
Excellent Properties of Weprofab PPE Pipe
Weprofab PPE pipe has excellent performance in many aspects.
Mechanical properties: Our PPE has strong tensile and bending resistance, with a tensile strength of 60~93 MPa and a bending strength of 75 MPa.
Thermal properties: Our PPE tube can withstand low temperatures of -40℃ and high temperatures of +200℃. Its water absorption rate is less than 0.1% and it will not soften in humid air.
Electrical properties: Our PPE has low dielectric loss and good insulation, and its resistivity is as high as 10^17 Ω·cm.
Other properties: In addition, Weprofab PPE tubes are also corrosion-resistant, UV-resistant, low-density, and easy to process.
Best PPE Pipe Supplier in China
Weprofab has more than 30 years of experience in producing PPE pipes. We have a variety of test workshops, including high temperature test workshops, Anti-deformation test workshops, corrosion resistance test workshops, etc. In addition, our PPE pipes have been sold to more than 100 countries and have passed ISO 9001, IATF 16949, UL 94, ASTM D6194, ISO 527, IEC 60243, and other industry certifications to ensure the reliable performance of PPE pipes.
PPE Pipe for Various Applications
PPE pipe can be used as an engine intake pipe, a fuel system pipe, an engine and battery coolant pipe, and a high-temperature cable sheath because of its advantages, such as high temperature resistance, corrosion resistance, and low water absorption.
PPE pipe is often used as a cable protective cover, as well as an insulation protective cover of relays and 5G base stations, because of its good insulation, high temperature resistance, hydrolysis resistance, and flame retardancy.
PPE pipe is resistant to hydrolysis and strong acid, strong alkali, and organic solvent corrosion, and can be used as a corrosive fluid delivery pipe and a high-temperature exhaust gas discharge pipe.
PPE ipe is often used as a photovoltaic panel coolant circulation pipe and an energy storage battery thermal management pipe because of its low density, high strength, and UV resistance.
We have previously used PPE pipes produced by Weprofab for our car intake pipes and engine cooling pipes. The results have been very good, without any deformation or damage. We have currently put PPE pipes into production for at least 3,000 cars, and we may purchase more PPE pipes for production in the future.
PPE pipe is more resistant to high temperatures, has higher strength and corrosion resistance, while PE has better flexibility and lower density. PPE pipe is more suitable for use in high temperature environments and as an insulating protective cover, while PE is more suitable for use in low temperature environments and agricultural irrigation. The processing cost and difficulty of PPE are higher, while the processing cost and difficulty of PE are lower.
The price of ordinary PPE pipe for general industrial use is between $10 and $20 per meter, the price of PPE pipe with flame retardant material is about $25 to $50 per meter, and the price of corrosion-resistant PPE pipe used in chemical plants is between $80 and $150 per meter. The price of PPE pipe for automobiles is between $30 and $60 per meter.
EPS Pipe
PE pipe
PC Pipe
PA Pipe
How to Produce PPE Pipe?
The production of PPE pipe requires the following steps.
Step 1: You should dry the PPE resin. In this step, you should dry the PPE resin at 120~150℃ for 2-4 hours to reduce its moisture content to less than 0.02%. This can prevent hydrolysis during processing. Then, use a mixer to mix glass fiber, flame retardant or antioxidant.
Step 2: You should melt the raw materials at 280~320℃ and then use a twin-screw extruder to extrude the melt.
Step 3: You should use a suitable mold to mold the melt. And use a segmented water cooling system to cool the molded pipe to a water temperature of 20~40℃.
Step 4: You should use a servo fly cutter to cut the pipe, and then anneal the thick-walled pipe at 80~100℃ for 2 hours.
Step 5: You should conduct heat deformation test, corrosion test, insulation test and surface smoothness test on the PPE pipe.
Step 6: You can use a laser to engrave the temperature resistance grade, production batch number and certification mark on the surface of the pipe, and package the PPE pipe with aluminum foil under vacuum.
